Seajet Pellerclean

SEAJET Peller Clean – The ultimate anti-fouling product for propellers and drives

Experience long-lasting, environmentally friendly protection for your propellers, stern drives and trim tabs! With SEAJET Peller Clean you benefit from an innovative foul-release coating that does not require biocides and is therefore kind to the environment. This transparent anti-fouling agent is specially designed for outboard motors up to 150 HP and is suitable for propellers made of steel, aluminum and bronze .

The set consists of a robust 2-component primer in ochre and a 1-component clear coating for maximum protection and easy cleaning - even at low speeds, growth is effectively reduced and can be rinsed off effortlessly.

Your benefits at a glance:

• Long-lasting anti-fouling: less friction and optimal performance of your drives
• Easy to use: Complete set including primer and final coating, also ideal for smaller outboard motors
• Wide range of applications: Compatible with steel, aluminum and bronze
• Environmentally friendly and biocide-free: Protection without harmful chemicals for sustainable use
  

set contents

• Primer:
  • 157 ml SEAJET Pellerclean Primer Base (color: beige)
  • 43 ml hardener for the primer
• Final coating:
  • 115 ml SEAJET Pellerclean Clear Coat (color: transparent)

The set is sufficient for approx. 0.7 m² surface and is ideal for smaller propellers and drives.

step-by-step application

1. Preparation of the substrate:

   • Remove old antifouling and dirt with a spatula, sandpaper and water.
   • Sand the surface smooth (grit 60-180 depending on the material).
   • Clean the surface thoroughly with degreaser and do not touch it with bare hands afterwards. We recommend Seajet Thinner A.

2. Mixing and applying the primer:

   • Mix SEAJET Pellerclean Primer Base and Hardener for 5 minutes.
   • Apply the mixture with a brush to all corners and then to the entire surface.
   • Allow to dry for 1 hour and apply a second coat.

3. Applying the clear coat:

   • Stir the SEAJET Pellerclean Clear Coat well 1 hour after the last primer coat.
   • Apply an even coat.
   • Repeat the process twice, allowing 2 hours drying time between each coat.

4. Drying:

   • After the last coat, allow the boat to dry for at least 8 hours at 15 °C before launching it.
   • At lower temperatures the drying time is longer.

maintenance and repair

• Recoating: In case of heavy wear, simply clean with fresh water and apply new coats.
• Repair: Follow steps 1-4 to repair damaged areas.

application instructions

• Process only under dry conditions and temperatures above 10 °C.
• Contains silicone – avoid soiling other surfaces.
• Dispose of brushes and residues in an environmentally friendly manner and do not use used brushes.

Perfect for boat owners who value efficient, easy-care and environmentally friendly protection . Protect your investment and ensure flawless performance on the water at all times – with SEAJET Peller Clean!